Basic Concept & Superior Features

“TPS” Roller contact type Servo stabilizer primarily consists of following major assemblies.

1)      Linear type vertical rolling contact regulator

In our regulator, we are using heavy section of electrolytic grade rectangular copper strip instead of copper wire to minimize the losses & increase the efficiency of equipment. We are using self lubricating Carbon Roller assemblies instead of ordinary Carbon brushes which offers more reliability and troble free performance of the equipment. The coils of Voltage regulator are vacuum impregnated and oven dried as per requirement.

2)      Double wound Buck/Boost Transformer

In our Buck/Boost transformer we are using CRGO laminations to minimize iron losses and coils of Buck/Boost Transformer are wound with heavy section of m strips electrolytic copper to minimize copper losses for getting better efficiency of the equipment. The coils of Voltage regulator are vacuum impregnated and oven dried as per requirement.

3)      Digital Control panel with display units.

We use digital controller for monitoring and controlling voltage. Repair & maintenance of these controllers is very easy.

4)      AC Synchronous motor of suitable Torque.

The Motor is mechanically coupled to the arm of continuously variable auto transformer which feeds to the primary of a Buck/Boost transformer.The stabilizer output voltage is compared with the

Trans Power Solution